Hi there my name is Ben, and I have played on GM servers for like 2 years, but have never really got into the forums until about a week ago! You will most likely find me on the Orange Box X3 server. Come say hi! I am usually online between 9am till 9pm, (not 12 hours straight ( ͡° ͜ʖ ͡°)) See you later! (Feel free to add me on steam: https://steamcommunity.com/id/benrobinson526/ )
Hello Ben. Certain you've seen me before on the server. Been messing about with pc hardware for about 10 years so i can give good advice on that part. Usually build pc's out of spare parts i've been given or come across. Take apart some electronics for fun or out of boredom as well. Along with doing some soldering for certain things like a 3 pin adapter for a fan that had its own 4 pin connector out of a dell but is a good size fan & moves a decent amount of air or similar or a molex too 3 pin fan splitter i've made a few of those, and ive also given a 20 to 24 pin extension its own power button so i can test power supplies without needing a pc or shoving a wire into green & ground. Ofc done some soldering for the rc hobby as well. Mostly soldering wires onto places again after they've been torn off from doing some mistake while handling it. Most recently did some soldering or the front panel of an old acer aspire case my older brother left behind so i could fit in a am3+ matx motherboard + athlon II x3 445 & 4 gb ddr3. Got a mini-z mr01 with an iwaver 01 board (clone of the mini-z mr01, using standard motor, ballbearings, carbon fibre suspension plate & 8t pinion gear for some more top speed.) Also got a mini-z monster clone called the iwaver 04 which is just about complete but needs some soldering for the steering as well as pinion gear + motor, & crystals for the receiver & radio. Lastly i got a brushless e-firestorm with a 3300 kv system, currently in parts after about 1.5 years of bashing & burning the esc,receiver after i found a hole with water in a field of grass while running it.
Thanks Vand and -M-M-! MM how do you come across so many spares?! Ive been looking for a new power distributer for my drone that i'm building, but I its so hard to find good quality second hand parts!
I do work a bit during my free time repairing pc's & most people know i got use of just about any pc parts. I guess you've checked hobbyking.com before ? This one for example if its to deliver power too the 4 esc's (Up to 20a on this unit) https://hobbyking.com/en_us/hobby-king-quadcopter-power-distribution-board.html Or is it something like this you are looking for ? https://hobbyking.com/en_us/super-m...-5v-12v-for-cc3d-revo-flight-controllers.html Or something like this (no bec or anything just a board too solder all the cables into.) https://hobbyking.com/en_us/hobbyking-mini-power-distribution-board.html
oooooo this looks really promising! Thanks Thanks for the warm welcome Thanks DrunkPug. Cant wait for you to dominate me again on Orange box